Avalehele
/
AUTOKOSMEETIKA + KEMIKAALID
/
ŠAMPOONID, KUIVATUSAINED
/
Šampūnas Rs keramikos dangoms atgaivinti 1L
KOCH CHEMIE
Reactivation Shampoo for Ceramic coating
happeline šampoon keraamilise katte taasaktiveerimiseks
20,50 €
Kirjeldus
Ohutusalane teave
Kommentaarid
Omadused
Kohaletoimetamise võimalused
Reactivation Shampoo
Descaling soap for ceramic coatings
Strong foaming, acidic shampoo to reactivate ceramic seals. Hydrophilic dirt such as dust, limescale and salts are removed by washing with the Reactivation Shampoo. Such dirt impairs the easy-to-clean effect and the hydrophobic effect of the ceramic-sealed surfaces. The acidic setting of the shampoo ensures that the dirt is loosened and removed. This revives the dirt and water-repellent properties of the ceramic coating.
Areas of use: Lacquer, glass and plastic in the outdoor area
Recommendations for use: Coarse dirt should be removed with an alkaline pre-cleaner and high-pressure wash before using Reactivation Shampoo. Dilute the shampoo 1:200 (for hand washing 50 ml to 10 l) with water. This achieves a pH of 3.0. When using a foam cannon, adjust the pre-dilution accordingly. Wash the pre-cleaned and still wet vehicle with a washing sponge. Rinse the product thoroughly to avoid stains. Dry off residual water.
Warnings: Do not let the product dry. Check for material compatibility before use. Protect from frost and excessive heat. Wearing gloves is recommended during application.
Descaling soap for ceramic coatings
Strong foaming, acidic shampoo to reactivate ceramic seals. Hydrophilic dirt such as dust, limescale and salts are removed by washing with the Reactivation Shampoo. Such dirt impairs the easy-to-clean effect and the hydrophobic effect of the ceramic-sealed surfaces. The acidic setting of the shampoo ensures that the dirt is loosened and removed. This revives the dirt and water-repellent properties of the ceramic coating.
Areas of use: Lacquer, glass and plastic in the outdoor area
Recommendations for use: Coarse dirt should be removed with an alkaline pre-cleaner and high-pressure wash before using Reactivation Shampoo. Dilute the shampoo 1:200 (for hand washing 50 ml to 10 l) with water. This achieves a pH of 3.0. When using a foam cannon, adjust the pre-dilution accordingly. Wash the pre-cleaned and still wet vehicle with a washing sponge. Rinse the product thoroughly to avoid stains. Dry off residual water.
Warnings: Do not let the product dry. Check for material compatibility before use. Protect from frost and excessive heat. Wearing gloves is recommended during application.
Sisu:
1 l
Toode
Autokosmetika
Kasutamine
Välispindade jaoks
Funktsioon
Šampoon
Pasiimsiu pats
Paštomatas
Pristatymas į namus
Drop-Pick Up Points
Ole esimene, kes kirjutab ülevaate