NOVOL
Description
Safety info
Comments
Characteristics
Delivery options
For professional use. Product subcategory 2.2., VOC limit value (cat. B/2) = 250g/l. VOC<90 g/l. Putty is a two-component, unsaturated resin-based product. Very suitable for smoothing out scratches and filling surfaces before painting. UNI PLUS - basic putty, suitable for use in a very wide area. Makes the surface soft, suitable for both manual and mechanical sanding, easy to work even when used on a large surface area. Good adhesion to various surfaces (including galvanized steel) and high elasticity guarantee high-quality repairs. Attention: Do not use directly on washable primer, 1-component acrylic and NC products.
USE:
1. Clean and polish the surface.
2. Degrease the surface.
3. Mix the required amount of components.
4. Putty.
5. Wait.
6. Grind.
Contains styrene. Usage time: 4-6 min. at 20°C. Curing time: 20-30 min. at 20°C. When heated to 60°C, this time is shortened to 10 minutes.
Recommended putty hardener (H5022, H5020) For professional use. Contains dibenzoyl peroxide (49-51%), diisobutyl phthalate (20-24%).
USE:
1. Clean and polish the surface.
2. Degrease the surface.
3. Mix the required amount of components.
4. Putty.
5. Wait.
6. Grind.
Contains styrene. Usage time: 4-6 min. at 20°C. Curing time: 20-30 min. at 20°C. When heated to 60°C, this time is shortened to 10 minutes.
Recommended putty hardener (H5022, H5020) For professional use. Contains dibenzoyl peroxide (49-51%), diisobutyl phthalate (20-24%).
Content:
2 kg
Product type
For bodywork
Usage
Putty
Usage
Remover
Feature
UNIVERSAL
Pasiimsiu pats
Paštomatas
Pristatymas į namus
Drop-Pick Up Points
You might also like
Be the first to write your review