Ceramic Black Polish 0.5l

Turtle Wax® Hybrid Solutions Ceramic Acrylic Black Polish is an all-in-one formula that corrects, enhances and adds protection to black paint finishes. Precision Polishing Platelets remove scratches, swirls and other paint imperfections. Black Pigmented Polish and Carnauba wax fills light imperfections and leaves a deep, rich black shine. The Ceramic SiO2 & Acrylic Polymers produce a durable protective layer that repels water, harsh chemicals and helps prevent permanent water stains for months.

Directions:
Wash and dry car. SHAKE WELL. For best results, do not over-apply high active formula— 60ml per vehicle is recommended.

HAND APPLICATION: Apply 3 small drops to a wax applicator pad and spread product evenly over a 60 cm x 60 cm. section with light to moderate pressure in an overlapping, circular motion. Remove excess with a microfibre cloth, turning to a clean side for the final wipe. Use a damp microfibre cloth to remove high spots and activate shine polymers. Re-wipe with dry microfibre cloth if necessary.

MACHINE APPLICATION: Apply 4 small drops evenly spaced onto a medium foam buffing pad. Apply to a 60cm x 60cm section. Use a D/A machine at a low speed to spread product then high-speed using light to moderate pressure in a crosshatch pattern. Remove excess with a microfibre cloth. Use a damp microfibre cloth to remove high spots and activate shine polymers. Re-wipe with dry microfibre cloth if necessary.

NOTE: Check product compatibility with the finish on a small area first. Not for use on rubber, vinyl, or matte finishes. Allow paint to cure for 24 hours before washing or applying an additional coat or topper. Avoid application on hot surfaces.

SHINE/PROTECTION TIP: Use HYBRID SOLUTIONS BLACK WAX as a topper to build shine & protection. Can also be used with other HYBRID SOLUTIONS WASH, WAX, DETAILER & COATING products.