GELCOAT Micro Cut Gm3.01 1L

EN Machine polishing compound for slightly damaged and matte gelcoats and boat paints, designed for the permanent removal of polishing haze, holograms, and fine scratches.
Holograms and fine scratches are removed mechanically.
High performance, easy to polish and easy to wipe off.
An ideal preparatory product for subsequent surface sealing.

Application Areas
Permanent removal of polishing haze, holograms, and fine scratches from gelcoats and boat paints.

Usage Recommendations
Can be used with an eccentric polishing machine.
Apply 5 pea-sized drops to a suitable polishing pad (Micro Cut Pad hard) and work in crosswise motions.
Spread the product on the surface at low speed, then switch to the highest speed.
Wipe off the remaining product with a Polish & Sealing Towel.
Subsequent surface sealing is required.

We recommend applying Gelcoat Finish, Marine Protective Sealant, or Ceramic Boat Hull after polishing to close the surface pores.
Shake well before use.
Check material compatibility before use.
Do not use on heated surfaces.
Protect from freezing and excessive heat.
Do not use on unpainted plastics or rubber.