GELCOAT Fine Cut Gf6.01 1L

Machine polishing compound for the preparation of moderately damaged gelcoats and boat paints.
Designed for quick and effective removal of medium scratches, such as dullness from fenders, oxidation, fading, and discolored spots.
Gelcoat Fine Cut can be used for extended polishing, creating a long-lasting deep gloss even on dark gelcoats and painted surfaces.
Easy, efficient application and simple polishing.
Ideal product for surface preparation before final gloss sealing. Contains no silicone oil.

Application Areas
Moderately damaged gelcoats and boat paints.

Usage Recommendations
Can be used with both rotary and dual-action polishing machines.
Apply 5 pea-sized drops to a suitable polishing pad (Fine Cut Pad) and work in crosswise motions.
Spread the product at low speed, then polish with a rotary machine at approx. 1000 rpm (dual-action – at maximum speed).
Polish and remove residues with a Polish & Sealing Towel.
After polishing, it is recommended to seal the surface with Gelcoat Finish, Marine Protective Sealant, or Ceramic Boat Hull to close surface pores and protect against rapid fading or contamination.
Shake before use. Check material compatibility.
Do not use on hot surfaces. Protect from frost and excessive heat.
May cause an allergic skin reaction.
If medical advice is needed, have the product container or label at hand.
Keep out of reach of children.
Avoid inhaling vapors or spray. Wear protective gloves.
In case of skin irritation, consult a doctor.
Dispose of contents/container in accordance with waste regulations.
Repeated exposure may cause skin dryness or cracking.

Contains:
1,2-benzisothiazol-3(2H)-one
2-methylisothiazol-3(2H)-one